Nautilus 2S Tank by Aspire
Aspire brings you the all new, just as curvy, Nautilus 2S. The new Nautilus 2S tank that comes in 2.6ml and a 2ml version for TPD. The latest in the Nautilus 2 tank series, a sleek, curvy design equipped with a 0.4ohm BVC coil for direct to lung vaping and a 1.8ohm BVC coil for mouth to lung vaping. Top-fill child resistant design with a silicone self seal keeps things clean, and as the coils are interchangeable with other Nautilus coils, it allows you to personalize your draw/vapor preference.
Aspire provides 2 types of drip tip for the Nautilus 2S, the pre-installed one is longer and made from stainless steel one, this one is for a mouth to lung vaping experience. For a more direct, restriced direct to lung hit, we have also provided a frosted shorter 'stubby' drip tip with a slightly wider bore.
The redesigned airflow adjustment at the base of the tank can be turned to adjust the airflow to your preference and coil choice. The smaller holes for mouth to lung with a 1.8 ohm coil will result in a tighter draw and for a looser direct to lung draw with a 0.4 ohm coil it can be opened wider to the slot style airflow.
Refilling the child resistant Nautilus 2S tank is simplicity itself and mess free. Unscrew the top cap anti-clockwise a few turns, Place your thumb on the top cap above the indicator spot and push away from you, this will reveal the filling slot. Push your eliquid bottle tip down through the filling slot (for TPD version: through the larger of the holes in the self sealing silicon filling slot). Once filled, slide the top cap back into place and screw the top cap back down. The unscrew and push action plus the perfect amount of strength resistance to open ensures that this tank will be child resistant and leak free.
Coil installation is as easy as unscrewing the base hardware from the main body of the tank, removing the glass tube, then screwing in the new coil. Then replace the glass and top hardware, and screw back onto the base hardware. The new Aspire Nautilus 2S tank is compatible with Nautilus BVC coils. Note: when installing a new coil, let the tanks stand for 5 minutes after filling to allow the cotton to fully saturate with eliquid to prevent damage to the coil and /or burning the wicking material.
1. Invert the tank and unscrew to remove the base hardware.
2. Push down the child-proof mechanism and unscrew to disengage the child-proof coil component.
3. Detach the used coil and replace it with a new one.
4. Insert the child-proof coil component into the tank, then push down and screw in to relocate the child-proof coil component.
5. Screw the base hardware back to the tank.
1* Nautilus 2S tank (Pre-installed a 1.8ohm coil) / 1*Extra drip tip / 1* 0.4ohm BVC coil / 10* O rings / 1* warranty card / 1* user manual