Congrevape - DOGE V3 RDA
- £15.00 £15.00
- Save £15
The Doge V3 is the third release from Congrevape in the Doge series of RDA's. The Congrevape Doge V3 keeps the same high quality and affordability, and adds many upgrades over the Doge V1 and V2 RDA's. The Doge V3 features an improved airflow system, a ceramic tip, more build space, multiple post configurations, and an extremely deep juice well.
The top cap of the Doge V3 has been redesigned to have the top cap and barrel as a single piece, allowing the build space to go up to 20mm from the 17.6mm build space in prior Doge models. This design removed the airflow control fins on the top cap, allowing for increased airflow without the double wall design previously found in the V1 and V2 models. Airflow control is now achieved by twisting the top cap to align with the notches on the deck.
The Doge V3 uses the CV Tip System that features a ceramic wide bore drip tip. The ceramic drip tip has an 11mm wide bore opening, and will resist getting hot. The tip is black ceramic that is polished to a high gloss finish.
The deck of the Congrevape Doge V3 keeps the square insulator design from the V2 model, and includes posts for both a tri-post setup, and a quad-post setup. The deck features 2.2mm post holes on the negative posts, as well as the dual center post, and 3mm post hole on the single center post. The juice well is also deeper then previous models at 9mm deep.
Stainless Steel Construction
Increased Build Space Over Previous Models
Tri Post and Quad Post Setups
2.2mm Negative Post Holes
2.2mm Dual Positive Post Holes, 3mm Single Positive Post Hole
Negative Post Milled Into The Deck
Copper Positive Posts
Copper Post Screws
Square PEEK Insluator
9mm Deep Juice Well
Dual Airflow with 10mm x 2.5mm Airflow Slits
Black Ceramic Wide Bore Tip With 11mm Opening
Ceramic Tip is Extremely Heat Resistant
1 x Congrevape Doge V3 RDA (Authentic)
1 x Copper Dual Post (Pre-Installed)
1 x Copper Single Post
2 x Spare Stainless Steel Screws
1 x Spare Copper Screw
1 x Spare Copper Contact
1 x Spare PEEK Insulator Set
3 x Spare O-Rings
1 x Screwdriver